SELF INSTALLATION

Installing a ROLEF product is quick, easy and painless -- Just follow a few easy steps.

Before Installing

Kick back in your favorite chair and watch the installation video (if available) and then read through the instructions. Be sure to check that you have received all the necessary package contents listed in your instruction guide before proceeding. If you are missing anything please contact us immediately. Next, gather any tools that are required for your installation, and you're ready to install!

Troubleshooting

Most issues are often solved with just a small adjustment. Read through some common concerns to see if there is a fix, but if you are still having troubles, contact us with your questions and we will do our best to reply as quickly as possible. Remember, adjustments are to be carried out BEFORE screws are put in!

Common Concerns:

• The Zipper won't close

Try adjusting your door by unfastening the hook & loop fasteners to provide a 1/8 to 1/4 inch leeway on each side. Make sure the zipper is straight - If it's not, the door may be off center.

• Magnets don't snap together naturally

Try adjusting your door by unfastening the hook & loop fasteners to provide a 1/8 to 1/4 inch leeway on each side.

• My door is too short or too long

Adjust the door and install the top portion to hold it in place. Install each side of the door from the bottom, making sure that it touches the floor, or step. Finish by adjusting the top.

• My foam is missing

If you are installing a side door, double check your package contents. All side doors are shipped with a piece of foam that is rolled up with the door.  Make sure you did not accidentally discard the foam!