CUSTOM ORDER

At ROLEF, we create unique, custom, perfectly fitted products thanks to our customers. Your unique requests inspire our team and allow us to bring your vision to life! We welcome any project, even those beyond Class B RVs—your ideas are always welcome!

If you're ready to place your custom order, gather your photos and measurements, submit them using the form below, and we’ll contact you with the next steps. We typically respond to custom order forms within 2-5 business days. If you have any questions before sending us the required photos, feel free to fill out the form.

You will find below the custom order form all the information we need from you to create your personalized project. 

CUSTOM ORDER INSTRUCTIONS

IMPORTANT: When taking pictures, please use a high enough resolution so we can clearly see the numbers on the measuring tape. If necessary, take one wide-view picture of the tape and a close-up to show where the tape starts and where it ends.

SLIDING DOOR

• Exterior View: Take a full-view photo of the sliding door from outside.

• Interior View: Capture a photo of the sliding door from inside the van, showing the surrounding area. To avoid sun glare, close the door and use the flash on your camera.

• Make sure the area adjacent to the door seal is clearly visible in the photo. If not, please retake the photo.

Important: Always measure inside the van, next to the door seal—never outside.

COUNTER HEIGHT

• If you have a counter, measure the height of the counter at the point where the lowest part of the counter meets the original floor, before the added floor (Ram Promaster and Ford Transit).

• Exception for Mercedes Sprinter: Due to the design, the measuring tape must be placed on the scuff plate instead.

FLOOR THICKNESS

• Measure the floor thickness at both the sliding door and the rear door. For Ford and Ram vans, this measurement is required.

PASSAGEWAY WIDTH

• If you have a counter, measure the width from the counter to the frame of the door next to the door seal (behind the passenger seat).

• Exception for Mercedes Sprinter: Due to the design, the measuring tape must be placed on the scuff plate instead.

CABINET OVER THE COUNTER PASSAGEWAY

If you have a cabinet above the counter, we need additional measurements:

• Measure the width of the passage from the edge of the counter to the door seal inside the van.

• Measure the height from the top of the counter to the bottom corner of the cabinet.

COUNTER JONCTION

• Please provide a clear photo showing how the counter meets the interior wall of the van.

REAR DOOR

• Full View Photo: Take a clear picture of the entire rear door.

• Bed Platform Measurement: Measure the vertical distance from the bottom of the bed platform bumper scuff plate.

Reminder: Don’t forget to provide the thickness of the flooring.

WINDOW

• Take a photo of the window with the measuring tape held straight across the inside of the frame. Take separate photos for horizontal and vertical measurements.

• Take separate photos for horizontal and vertical measurements.

• If your window has a frame, include an additional photo showing the frame itself with the measuring tape.

  ---

  
  

ORGANIZER AND OTHER

For custom orders such as wall organizers and others, please provide a photo of the location for your project. Include the length and width dimensions of the area to ensure proper sizing. Don’t forget to provide a description of your project.